Losma Argos Pro oil mist collector, oil mist filter, fume separator, dust collector, industrial air filter, machine tool air filter.
The new Argos Pro series filters are designed for the filtration of oil mists (emulsion as well as neat oil), vapors and smokes deriving from a variety of machining processes.
This filtration unit has purposely been conceived for the industrial sector, and its important features lie in its sturdiness, reliability and simplicity in conduction and maintenance.
Available in 3 sizes with flow rates ranging from 3.000 to 15.000 m3/h and with increasing filtration efficiency rates to reach 99,97%.
Technical information
LOSMA grants that every single system is tested through strict control procedures.
Every unit is provided with a qualitative and functional test certificate.
Operation
- The air entry section, which connects the piping to the filter, consists in a large area which serves as a calming chamber (A). Inside this area a pre-blasting system “Twister” (B) (optional) can be provided, which further facilitates the aggregation of the finer particles by means of a forced centrifugal effect.
- Subsequently, the air passes through two separate and reusable filtration stages, a PVC drop separator and a metallic G2 filter (C), with an efficiency of 80-90% following ISO 16890 – ISO COARSE 30%.
- The next area consists of a chamber which houses the filter elements, cartridges with folds (D), with a high filtration surface which withholds the finer impurities. These cartridges are covered by a highly absorbent, coalescent filter which also allows for an even distribution of the air flow over the entire cartridge. This filter has a filtration efficiency of F5, namely 40-60%, while cartridges have an efficiency of F9 about 95%.
- Argos Pro is standard-equipped with a manometer to monitor the clogging of the filter elements. Upon request it can also be provided with a digital display to visualize the main functions and the exclusive system “LED Up”, which signals the clogging of the filter elements by means of three different colors. Access to the filtration chamber is possible through a hinged door, the horizontal positioning of the cartridges allows quick and easy access and maintenance. Removal of the filters is simple, fast and clean because the two chambers of filtration system are separated by a panel which also serves as a support structure for the filter elements. The recondensed oil mist particles are collected in a large tank, which includes an external visual level and (upon request) a pump to automatically remove the collected liquid (E).
Optional
1. Absolute Filter HEPA H13
To obtain a very high filtration level, 99,97% according to norm EN 1822. Particularly suitable for micro mists and smokes. The filter has an easy attachment-detachment system for a practical maintenance.
2. Carbon Filter
Activated carbons for removal of odors from previously filtered air.
3. LED Up
Digital system which allows for an easy and rapid visualization of the filter clogging status, thanks to the combination of a pressure gauge and a LED strip using three different colors (green, yellow, red).
4. H13 Clogging Sensor
Clogging light indicator for absolute filter HEPA H13.
5. Transfer Pump
Pump including float for automatic emptying of the liquid collecting tank.
6. Twister
Helicoidal system which forces a strong centrifugal movement of air, facilitating the aggregation of the oil micro particles.
Download a Losma Argos Pro Oil Mist Collector brochure2.62 MB