Losma Argos Pro Oil Mist Collector

Losma Argos Pro oil mist collector, oil mist filter, fume separator, dust collector, industrial air filter, machine tool air filter.

The new Argos Pro series filters are designed for the filtration of oil mists (emulsion as well as neat oil), vapors and smokes deriving from a variety of machining processes.

This filtration unit has purposely been conceived for the industrial sector, and its important features lie in its sturdiness, reliability and simplicity in conduction and maintenance.

Available in 3 sizes with flow rates ranging from 3.000 to 15.000 m3/h and with increasing filtration efficiency rates to reach 99,97%.

Technical information

LOSMA grants that every single system is tested through strict control procedures.

Every unit is provided with a qualitative and functional test certificate.

Operation

• The air entry section, which connects the piping to the filter, consists in a large area which serves as a calming chamber (A). Inside this area a pre-blasting system “Twister” (B) (optional) can be provided, which further facilitates the aggregation of the finer particles by means of a forced centrifugal effect.
• Subsequently, the air passes through two separate and reusable filtration stages, a PVC drop separator and a metallic G2 filter (C), with an efficiency of 80-90% following ISO 16890 – ISO COARSE 30%.
• The next area consists of a chamber which houses the filter elements, cartridges with folds (D), with a high filtration surface which withholds the finer impurities. 
These cartridges are covered by a highly absorbent, coalescent filter which also allows for an even distribution of the air flow over the entire cartridge.
 This filter has a filtration efficiency of F5, namely 40-60%, while cartridges have an efficiency of F9 about 95%.
• Argos Pro is standard-equipped with a manometer to monitor the clogging of the filter elements. Upon request it can also be provided with a digital display to visualize the main functions and the exclusive system “LED Up”, which signals the clogging of the filter elements by means of three different colors.
 Access to the filtration chamber is possible through a hinged door, the horizontal positioning of the cartridges allows quick and easy access and maintenance. Removal of the filters is simple, fast and clean because the two chambers of filtration system are separated by a panel which also serves as a support structure for the filter elements. The recondensed oil mist particles are collected in a large tank, which includes an external visual level and (upon request) a pump to automatically remove the collected liquid (E).

Optional

1. Absolute Filter HEPA H13

To obtain a very high filtration level, 99,97% according to norm EN 1822. Particularly suitable for micro mists and smokes. The filter has an easy attachment-detachment system for a practical maintenance.

2. Carbon Filter

Activated carbons for removal of odors from previously filtered air.

3. LED Up

Digital system which allows for an easy and rapid visualization of the filter clogging status, thanks to the combination of a pressure gauge and a LED strip using three different colors (green, yellow, red).

4. H13 Clogging Sensor

Clogging light indicator for absolute filter HEPA H13.

5. Transfer Pump

Pump including float for automatic emptying of the liquid collecting tank.

6. Twister

Helicoidal system which forces a strong centrifugal movement of air, facilitating the aggregation of the oil micro particles.

Download a Losma Argos Pro Oil Mist Collector brochure2.62 MB

Losma Darwin oil mist collector, oil mist filter, fume separator, dust collector, industrial air filter, machine tool air filter.

Losma Darwin is a range of centrifugal oil mist filters for cleaning air containing oil mists, micro-mists and smokes produced when using coolants (emulsion or neat oil). It has been designed to be mounted on or off the machine.

• It is available in 4 sizes, for a flowrate up to 3000 m³/h, with 3 different interchangeable filtration technologies.
• It can be mounted horizontally or vertically
• Double filtration system
• Easy installation
• Stainless steel version

Unit tested

Losma grants that every single system is tasted through strict control procedures. Every unit is provided with a qualitative and functional test certificate.

Fast and easy maintenance

Access to the filtration section is very easy and quick, without having to unscrew or disassemble anything.

Condensation and drainage

Darwin series grants incomparable capacity of re-condensation and drainage of filters and liquids which may then collected and recycled.

Technical information

It is available in 4 sizes with three different, interchangeable filtration technologies:

• Turbina: suitable for surface machining also in the presence of heavy particulates
• Mono centrifuge: suitable for all machining processes
• Double centrifuge: suitable for all machining processes above all heavy machining conditions like use of high pressure.

Throughputs available are from 600 to 3.000 m3/h, with different combination for increasing filtration efficiency, up to 99,97%.

Operation

• Polluted air is drawn into the system (A) thanks to the depression generated from the rotation of the centrifuge (B), which gives the air a swirling movement.
• Air passes through the special expanded polyurethane foam inserts positioned in the centrifuge (only in mono and double version) and then into a net. The combination of all these elements facilitates the re-coalescing of oil particles – including the finer ones.
• Air crosses a further static filtration layer (C) before being re-introduced into the working environment (D). The re-condensed liquid is eliminated through the drainage tube in constant positive pressure (E).
• Darwin series grants a filtration efficiency of over 95%, also for pollutant particles below one micron; this efficiency rate can be increased to 99,97% with the use of an absolute post-filter (HEPA FILTER) according to EN 1822 norms.

Optional

1. Clipper

Available with F9 filtration level (95%) or H13 efficiency, up to 99,97% following EN 1822 norms. Useful in case of micro-mists and smoke.

2. Guard

Pre-filtration module for swarf, chips and dust, working through metallic and synthetic filtration stages. Useful to optimize the air suction efficiency in case of high production of oil mists containing dusts and metallic swarf chips.

Download a Losma Darwin Oil Mist Collector brochure1.05 MB

Losma Galileo Plus oil mist collector, oil mist filter, fume separator, dust collector, industrial air filter, machine tool air filter.

Losma Galileo Plus is a centrifugal oil mist filter for mist generated from neat oil and emulsions used in machine tools, also suitable in the presence of particulate. It is designed to be mounted to the machine tools.

• Grants a high-efficiency filtration
• Long lasting filters
• Very low electrical consumption
• Easy mounting
• Innovative design

Unit tested

Losma grants that every single system is tasted through strict control procedures. Every unit is provided with a qualitative and functional test certificate.

Reduced electrical consumption

Galileo Plus uses energy saving motors with high efficiency and very low power (KW).

Quick and easy maintenance

Internal filters can be cleaned or changed simple opening of a cover.

Technical information

Galileo Plus is available in 5 models with throughputs from 325 to 3.500 m3/h. The system has a special turbine deigned for avoiding dust settlement on its surface, in order to reduce the vibration problem also in presence of high quantity of particulate.

Operation

• Polluted air is drawn from machine tool into the lower pre-chamber (A) of Galileo Plus.
• The acceleration effect, due to the centrifugal force generated by rotating turbine, makes the oil particles bind together and return to liquid state, using the coalescence principle.
• A special Multilayer filter (B) having high filtration efficiency, stops and catches even the smallest pollutant particles, avoiding their dispersion in environment.
• Thanks to a special drainage tube (C) the liquid oil is sent back to the machine tool, to be re-used in working process.

Optional

1. G-Clipper Plus

Post-filter cartridge for micro-mist, smoke and vapor. It allows to reach a high filtration level up to 99,97%.

2. G-Guard

Pre-filtration module useful to optimize air filtration efficiency, in case of high production of oil mist containing dust or swarf chips, also with high pressures. The G-Guard is washable.

Download a Losma Galileo Plus Oil Mist Collector brochure855.15 KB

Losma Icarus oil mist collector, oil mist filter, fume separator, dust collector, industrial air filter, machine tool air filter.

Losma Icarus is a static exhaust fan for filtration of air containing oil mists, micro-mists and smokes, generated from coolants (both emulsion or neat oil). It is designed to be mounted on the machine tools.

• Available in 3 sizes, with a flowrate up to 2000 m3/h
• Increasing filtration efficiency
• Versatility and modularity

Unit tested

Losma grants that every single system is tasted through strict control procedures. Every unit is provided with a qualitative and functional test certificate.

Easy and quick maintenance

Access to filtering section is very easy and quick, you don’t need to unscrew or dismantle any part. Just open the two locks on the door and access to the filters, which can be extracted easily and changed in a few minutes.

Energy efficiency

Using centrifugal fans with high efficiency grants high performances for flowrate and pressure, together with reduced power consumption and limited energy usage. Icarus also has very low noise emission.

Technical information

Icarus is available in three sizes with flowrate from 600 to 2.000 m3/h with different filtration efficiency combination, up to performances of 99,97%.

Operation

• Polluted air is drawn in by a high efficiency centrifugal fan (A), mounted behind the filters. In this way the fan cannot be damaged, since it works with clean air without any pollutant residual.
• Air passes initially through a special deflector (B), whose function is to distribute uniformly the air onto filter’s surface, assuring a proper use of the whole useful contact area of the filter.
• Then the air crosses a series of filter with increasing efficiency (C) up to more than 95% with polluted particles measuring less than micron. Efficiency can reach 99,97% with use of a HEPA post-filter following EN 1822 regulation.

Optional

1. High efficiency H13 filter

Provides a very high filtration efficiency, up to 99,97%, following the EN 1822 regulation. Useful in case of micro-mists and smokes.

2. C.A. After filter

Activated carbons for removal of odors from previously filtered air.

3. X Guard

Pre-filtration module for swarf and dust, working through metallic and synthetic filtration stages. Useful to optimize the air suction efficiency in case of high production of oil mists containing dusts and metallic swarf.

Download a Losma Icarus Oil Mist Collector brochure1.52 MB

Losma Icarus E oil mist collector, oil mist filter, fume separator, dust collector, industrial air filter, machine tool air filter.

Losma Icarus E is an electrostatic filter for filtration of air containing oil mists, micro – mists, vapors and smokes generated by removal machining, especially those using neat oil; also it is design to be assembled to the machine tools.

• Available in 3 sizes
• Versatility and modularity
• Uses only restorable filters

Unit tested

Losma grants that every single system is tasted through strict control procedures. Every unit is provided with a qualitative and functional test certificate.

Easy and quick maintenance

Access to filtering section is very easy and quick, you don’t need to unscrew or dismantle any part. Just open the two locks on the door and access to the filters, which can be extracted easily and changed in a few minutes.

Energy efficiency

Using centrifugal fans with high efficiency grants high performances for flowrate and pressure, together with reduced power consumption and limited energy usage. Icarus also has very low noise emission.

Technical information

It’s available in three sizes from 600 to 1.700 m3/h with different increasing filtering efficiency combinations, up to 99,97% (with the use of HEPA H13 final filter). Standard equipment of the system is made by an electrical control box, “CE” regulation compliant, including an obstruction alarm, power alarm and micro-switch for safety.

Operation

• Polluted air is drawn in by a high efficiency centrifugal fan (A), mounted behind the filters. In this way the fan cannot be damaged, since it works with clean air without any pollutant residual.
• Air passes initially through a special deflector (B), whose function is to distribute uniformly the air onto filter’s and cell’s surface.
• After passing through the metallic pre-filter (restorable) (C) air passes through the ionizing section of cells (D), charging electrostatically, and passing then into the collector section composed by many aluminium foils, which holds firmly also the finest particles.

Optional

1. High efficiency H13 filter

Provides a very high filtration efficiency, up to 99,97%, following the EN 1822 regulation. Useful in case of micro-mists and smokes.

2. C.A. After filter

Activated carbons for removal of odors from previously filtered air.

3. X Guard

Pre-filtration module for swarf and dust, working through metallic and synthetic filtration stages. Useful to optimize the air suction efficiency in case of high production of oil mists containing dusts and metallic swarf.

Download a Losma Icarus E Oil Mist Collector brochure1.52 MB

Losma Argos oil mist collector, oil mist filter, fume separator, dust collector, industrial air filter, machine tool air filter.

The new Losma Argos series filters are designed for the filtration of oil mists (emulsion as well as neat oil), vapors and smokes deriving from machining processes.

• Designed for larger machine tools and centralised applications.
• Engineered for flowrates up to 15.000 m³/h
• LED UP System for filter clogging control

Unit tested

Losma grants that every single system is tested through strict control procedures. Every unit is provided with a qualitative and functional test certificate.

Maximum efficiency of filtration

With HEPA H13 post- filters reach an efficiency of 99,97%.

Fast and easy maintenance

Access to the filtration section is very easy and quick, without having to unscrew or disassemble anything. Simply unlock and open the hinged door to access the filters, which can easily be extracted and replaced in a short time.

Technical information

This filtration unit has purposely been conceived for the industrial sector, and its important features lie in its sturdiness, reliability and simplicity in conduction and maintenance. Available in 3 sizes with flowrates ranging from 3.000 to 15.000 m3/h and with increasing filtration efficiency rates to reach 99,97%.

Operation

• The air entry section, which connects the piping to the filter, consists in a large area which serves as a calming chamber (A). Inside this area a pre-blasting system “Twister” (B) (optional) can be provided, which further facilitates the aggregation of the finer particles by means of a forced centrifugal effect.
• Subsequently, the air passes through two separate and reusable filtration stages, a PVC drop separator and metallic G2 filter (C), with an efficiency of 80-90% following UNI EN 779.
• The next area consists of a chamber which houses the filter elements, cartridges with folds (D), with a high filtration surface which withholds the finer impurities. These cartridges are covered by a highly absorbent, coalescent filter which also allows for an even distribution of the air flow over the entire cartridge. This filter has a filtration efficiency of F5, namely 40-60%, while cartridges have an efficiency of F9 about 95%.
• Argos is standard-equipped with a monometer to monitor the clogging of the filter elements. Upon request it can also be provided with a digital display to visualize the main functions and the exclusive system “LED UP”, which signals the clogging of the filter elements by means of three different colors. Access to the filtration chamber is possible through a hinged door, the horizontal positioning of the cartridges allows quick and easy access and maintenance. Removal of the filters is simple, fast and clean because the two chambers of filtration system are separate by a panel which also serves as a support structure for the filter elements. The recondensed oil mist particles are collected in a large tank, which includes an external visual level and a pump to automatically remove the collected liquid (E).

Optional

1. Absolute filter H13

To obtain a very high filtration level, 99.97% according to norm EN 1822. Particularly suitable for micro mists and smokes.

2. LED UP

Digital system which allows for an easy and rapid visualization of the filter clogging status, thanks to the combination of a pressure gauge and a LED strip using three different colors (green, yellow, red).

3. Carbon filter

Activated carbons for removal of odors from previously filtered air.

4. Transfer pump

Pump including float for automatic emptying of the liquid collecting tank.

5. Twister

Helicoidal system which forces a strong centrifugal movement of air, facilitating the aggregation of the oil micro particles.

Download a Losma Argos Oil Mist Collector brochure573.60 KB

Losma Pascal dust collector, fume separator, industrial air filter, machine tool air filter.

The new Losma Pascal filter series are designed for the filtration of dust and smoke deriving from many machining processes.

• Designed for large machine tools and centralised application.
• Available in 6 sizes
• Automated Cleaning system to re-generate filtering elements

Unit tested

Losma grants that every single system is tasted through strict control procedures. Every unit is provided with a qualitative and functional test certificate.

Easy and quick maintenance

Access to filtering section is very easy and quick. Simply unlock and open the hinged door to access the filters, which can easily be extracted and replaced.

Long lasting filters

The automatic cleaning system grants long lasting filters.

Technical information

The filtration module has specially been conceived for the industrial sector, where its important features lie in sturdiness, reliability and easiness of running and maintenance. It is available in 3 sizes with flowrates ranging from 3.000 to 9.000 m3/h and with increasing filtration efficiency rates to reach 99,97%.

Operation

• The air entry section, which connects the piping to the filter, consist in a large section which serves as a calming chamber (A).
• The following area consists of a chamber which houses the filter elements, cartridge with folds (B) with a high filtration surface, with F9 efficiency of 95%, withholding the finer impurities.
• These cartridges are kept in perfect conditions from a programmable electronic cleaning system using compressed air (C) for counter-washing, which monitors continuously ΔP and manage sequentially the opening of electro-valves and the consequent cleaning cycles conserving compressed air consumption, contained in the storage reservoir. The program controller is equipped with a visual display for the visualization of main functionalities and the alarm limit planning.
• The horizontal positioning of the cartridges allows fast and quick maintenance, access to the filtration chamber is possible through a hinged door. Filter removal is easy, quick and clean, because the dirty chamber is separated from the clean section by a panel which also serves as a support structure for the filter elements. Dust is collected in a large tank (D), which can easily be moved with mechanical lift.

Optional

1. Absolute filter H13

To obtain a very high filtration level, 99,97% according to norm EN 1822. Particularly suitable for micro-mists and smokes.

2. C.A. After filter

Activated carbons for removal of odors from previously filtered air.

Download a Losma Pascal Dust Collector brochure1.60 MB

Losma M Pascal fume separator, dust collector, industrial air filter, machine tool air filter.

The new Losma Pascal M filter series are designed for the filtration of dusts and smokes deriving from many machining processes.

• Available in 2 sizes with max flowrate up to 2.500 m³/h
• It is mounted on a wheels allowing easy movement.
• Powerful aspiration.

Unit tested

Losma grants that every single system is tasted through strict control procedures. Every unit is provided with a qualitative and functional test certificate.

Easy and quick maintenance

Access to filtering section is very easy and quick. You can just open the front door to access the filters, which can easily be extracted and replaced in a short time.

Long lasting filters

The automatic cleaning system grants long lasting filters.

Technical information

The filtration module has specially been conceived for the industrial sector, where important features lie in its sturdiness, reliability and easiness of conduction and maintenance. It is available in 2 sizes with flowrates of 1.500 and 2.500 mc/h with increasing filtration rates to reach 99,97%.

Operation

• The air entry section, which connects the piping or the suction arm (optional), consist in a large section which serves as a calming chamber (A).
• The following area consists of a chamber which houses the filter elements, cartridge with folds (B) with a high filtration surface, with F9 efficiency of 95%, withholding the finer impurities.
• These cartridge are kept in perfect conditions from a cleaning system (optional) using compressed air (C), consisting in a Timer which manage the opening of the electro-valves positioned on the storage reservoir and the cleaning cycles.
• The horizontal positioning of the cartridges allows fast and quick maintenance, access to the filtration chamber is possible through a hinged door. Filter removal is easy, quick and clean, because the dirty chamber is separated from the clean section by a panel which also serves as a support structure for the filter elements. Dust is collected in a collection tank (D), which can easily be removed and emptied. The filtration group is equipped with a trolley in order to be moved into workshop.

Optional

1. Absolute filter H13

To obtain a very high filtration level, 99,97% according to norm EN 1822. Particularly suitable for micro-mists and smokes.

2. C.A. After filter

Activated carbons for removal of odors from previously filtered air.

3. Cleaning system

Cleaning system in counter-washing composed by a programmable Timer, collecting tank and electro-valves.

4. Suction Arm

Suction arm with 3 joints, including a 360° turning swivel ring and cupboard with handle.

Download a Losma Pascal M Dust Collector brochure1.60 MB

Losma DTE coolant filter, neat oils filtration, emulsion filtration, industrial coolant filtration, machine tool coolant filtration.

Losma DTE is a flatbed coolant filter, using non-woven fabric for eliminating magnetic and non-magnetic particles from neat oil and emulsion.

• Filtration degree determined by the choice of the fabric ranging from 10 to 50 microns.
• Reliable and versatile system
• Available in stainless steel version.

Unit tested

Losma guarantees that every single unit is individually tested through strict control procedures. Each unit is issued a test certificate for quality and function.

Economical

Fabric media filtration guarantees a high filtration efficiency with a limited initial investment..

Technical information

Losma DTE filtration degree can be determined by the choice of the fabric, ranging from 10 to 50 microns, granting the highest level of filtration. Losma DTE is available in 12 sizes, with a flowrate capacity from 50 to 400 l/min of emulsion and from 25 to 200 l/min of neat oil.

Operation

• The dirty coolant falls into the distribution trough (A) and from here onto the filter fabric (B) which retains solid pollutant particles (dust and swarfs) while the filtered oil passes through it.
• The fabric collects progressively the pollutant, until losing its filtering capacity. At this stage the liquid collects on the through and lifts the float (C) and starts an automatic system, which advances the collection tray to change the exhausted fabric with the new one.
• Exhausted fabric (D) is collected in a dedicated tank. The clean liquid is collected the tank below (E), in order to be pumped back to the machine tool.

Optional

1. Skim

Superficial oil skimmer, it allows to lengthen coolant quality and eliminate odors generated by anaerobic bacteria.

2. DMD

Pre-filtration system with rotating magnetic discs for the separation of magnetic polluting particles from coolant.

3. Electrical panel

For powering the system, control and command all signals.

4. Colleting tank

For clean liquid collection, to be sent back to the machine tool.

5. Transfer tank

To collect dirty liquid for feeding the filter

6. Pump

For pressure from 0,1 to 100 bar for returning clean liquid.

Download a Losma DTE Coolant Filter brochure7.04 MB

Losma Spring coolant filter, neat oils filtration, emulsion filtration, industrial coolant filtration, machine tool coolant filtration.

Losma Spring is a self-cleaning drum filtration system, with permanent metallic net, suitable for removal of magnetic or non-magnetic particles from neat oil or emulsion.

• Restorable Stainless steel metallic net
• Dredge system for mud discharge
• Completely customizable
• Autocleaning System.

Unit tested

Losma guarantees that every single unit is individually tested through strict control procedures. Each unit is issued a test certificate for quality and function.

Eco-friendly

Losma Spring system uses metallic filter net which is cleaned thanks to a self-cleaning system.

Reducing costs

Losma Spring system does not use consumable material, reducing costs for maintenance and industrial waste disposal.

Technical information

Losma Spring is available in 9 sizes with flowrates ranging from 25 to 1000 l/min of neat oil and from 50 to 2000 l/min of emulsion. The drum’s filtration efficiency can be customized according to customer requirements.

Operation

• The metallic filter net covering the drum is clean (A). the dirty coolant passes through it depositing the pollutant particles and goes through the discharge opening (B). from here the clean coolant falls into the collection tank positioned below, from where pumps will transfer it back to the machine tool. During this phase the drum does not rotate and the dredging system is stationary. The polluting particles deposited on the filter net forms the actual filtering layer which can also reach a thickness of 10-15 mm.
• As the filter net gradually gets dirty, the liquid level increases. The dirty coolant continues to deposit pollutant particles onto the drum surface, while the drum and dredging system (C) are still. The filtration level improves due to the thickness of the mud deposited on the filter net.
• Coolant cannot pass though the filter net any longer – filter net clogging cycle is complete this phase is when the best filtration level is reached. The longer the filter operates under these conditions the better the average filtration will be. When the coolant reaches the maximum internal level allowed, a self-cleaning cycle is started automatically. At the end of this phase the coolant level descends and the filtration cycle begins again.

Optional

1. DMD

Pre-filtration system with rotating magnetic discs for the separation of magnetic polluting particles from coolant.

2. Magnetic dredging bed

To facilitate ferromagnetic elimination.

3. Skim

Superficial oil skimmer, it allows to lengthen coolant quality and eliminate odors generated by anaerobic bacteria.

4. Collecting tank

For clean liquid to be sent back to machine tool.

5. Mud Compactor

Used to reduce the volume of mud intended for disposal and for reducing the liquid contained therein. The obtainable compacting level can change on the basis of mud, liquid used and many other factors such as cycle timing. The reduction in volume and of humidity is obtained through pressing with static load. The volume efficiency reduction is from 40% to 20% and for liquid residual from 30% to 10%.

6. Transfer tank

To collect dirty liquid for feeding the filter.

7. Electrical panel

For powering the system, control and command all signals.

8. Pumps

For pressure from 0,1 to 100 bar for returning clean liquid.

Download a Losma Spring Coolant Filter brochure1000.74 KB

Losma Spring coolant filter, neat oils filtration, emulsion filtration, industrial coolant filtration, machine tool coolant filtration.

Losma Spring Compact is a self-cleaning drum filtration system, suitable for flowrates ranging from 100 to 5000 l/min of neat oil or emulsion.

• Restorable Stainless steel metallic net
• Dredge system for mud discharge
• Completely customizable
• Autocleaning System
• No deposit in tank

Unit tested

Losma guarantees that every single unit is individually tested through strict control procedures. Each unit is issued a test certificate for quality and function.

Eco-friendly

Losma Spring system uses metallic filter net which is cleaned thanks to a self-cleaning system.

Reducing costs

Losma Spring system does not use consumable material, reducing costs for maintenance and industrial waste disposal.

Technical information

The drum’s filtration efficiency can be customized according to customer requirements. Losma Spring Compact has the characteristic of processing only the quantity of coolant needed by the machine; the clean coolant tank is welded in one piece together with the filter.

Operation

• The metallic filter net covering the drum is clean (A). The dirty coolant passes through it depositing the pollutant particles and goes through the discharge opening (B). From here the clean coolant falls into the collection thank welded in one piece with the filter, from where pumps will transfer it back to the machine tool. During this phase the drum does not rotate and the dredging system is stationary. The polluting particles deposited on the filter net forms the actual filtering layer which can also reach a thickness of 10-15 mm.
• As the filter net gradually gets dirty, the liquid level increases. The dirty coolant continues to deposit pollutant particles onto the drum surface, while the drum and dredging system (C) are still. The filtration level improves due to the thickness of the mud deposited on the filter net.
• Coolant cannot pass through the filter net any longer – filter net clogging cycle is complete. This phase is when the best filtration level is reached. The longer the filter operates under these conditions, the better the average filtration will be. When the coolant reaches the maximum internal level allowed, a self-cleaning cycle is started automatically and the drum rotates. At the end of this phase the coolant level descends and the filtration cycle begins again.

Optional

1. DMD

Pre-filtration system with rotating magnetic discs for the separation of magnetic polluting particles from coolant.

2. Magnetic dredging bed

To facilitate ferromagnetic elimination.

3. Skim

Superficial oil skimmer, it allows to lengthen coolant quality and eliminate odors generated by anaerobic bacteria.

4. Collecting tank

For clean liquid to be sent back to machine tool.

5. Mud Compactor

Used to reduce the volume of mud intended for disposal and for reducing the liquid contained therein. The obtainable compacting level can change on the basis of mud, liquid used and many other factors such as cycle timing. The reduction in volume and of humidity is obtained through pressing with static load. The volume efficiency reduction is from 40% to 20% and for liquid residual from 30% to 10%.

6. Transfer tank

To collect dirty liquid for feeding the filter.

7. Electrical panel

For powering the system, control and command all signals.

8. Pumps

For pressure from 0,1 to 100 bar for returning clean liquid.

Download a Losma Spring Compact Coolant Filter brochure1000.74 KB

Losma Master coolant filter, neat oils filtration, emulsion filtration, industrial coolant filtration, machine tool coolant filtration.

Losma Master is a range of high efficiency gravity filters, using non-woven fabric as filter media.

• Available in 3 families: Losma Master – Losma Medio Master – Losma Mini Master
• Suitable to customer request
• Stainless steel version available

Unit tested

Losma guarantees that every single unit is individually tested through strict control procedures. Each unit is issued a test certificate for quality and function.

Compact

Compared to flatbed filters of the same capacity, dimensions are significantly smaller and can achieve greater levels of filtration.

No waste of fabric

Compared to flatbed filters, gravity beds use less fabric and have a better efficiency.

Technical information

Losma Master series is available in 4 models, able to manage flowrates from 200 to 1000 l/min of neat oil and from 400 to 2000 l/min of water based emulsion, contaminated by magnetic or non-magnetic particles. Losma Medio Master is available in 3 models, able to manage flowrates from 200 to 400 l/min of neat oil and from 400 to 800 l/min of water based emulsion, contaminated by magnetic or non-magnetic particles. Losma Mini Master is available in 3 models, able to manage flowrates from 60 to 200 l/min of neat oil and from 100 to 400 l/min of water based emulsion, contaminated by magnetic or non-magnetic particles.

Operation

• The filtering fabric (A), stretched inside the filter, is perfectly clean. The dirty liquid enters in the system and has to pass through it to go to the lower tank, thus depositing pollutant particles on its surface. The clean liquid goes through the lower part where the discharge opening (B) is located and falls into the tank underneath. During this phase the system is idle and the fabric is not advancing; pollutant which is deposited on the filter fabric forms the actual filtering layer, which in many applications can reach a thickness of 10 mm.
• The dirty filter fabric permeably is reduced, because the dirty liquid continues to deposit the pollutant onto its surface, and the coolant level starts increasing. The filtration degree improves due to the thickness of the mud deposited on the filter fabric. During this phase the system idle.
• The liquid has reached its maximum level, at this stage the best possible filtration degree is actually reached. The longer the filter operates in this conditions, the better the average filtration will be. The system is idle also in this phase.
• When the fabric is totally obstructed and the liquid cannot pass through it anymore, the regeneration cycle begins. Motor reducer allow the system to rotate and moves the dirty filter fabric (C), while the clean one is introduced and permeability restored, allowing for the level to descend and return to intermediate condition 2.

Optional

1. Skim

Superficial oil skimmer, it allows to lengthen coolant quality and eliminate odors generated by anaerobic bacteria.

2. DMD

Pre-filtration system with rotating magnetic discs for the separation of magnetic polluting particles from coolant.

3. Electrical panel

For powering the system, control and command all signals.

4. Collecting tank

For clean liquid to be sent back to machine tool.

5. Transfer tank

To collect dirty liquid for feeding the filter.

6. Pumps

For pressure from 0,1 to 100 bar for returning clean liquid.

Download a Losma Master Coolant Filter brochure1.82 MB

Losma DMD magnetic separator, magnetic particles separator, industrial coolant filtration, machine tool coolant filtration.

Losma DMD is a rotating discs magnetic separators for coolants used during industrial machining contaminated by magnetic particles. Losma DMD P was designed for flowrates over 600l/min of emulsion and 300l/min of neat oil  whose robust structure is suitable for big machine tools and centralized applications.

• Losma DMD and Losma DMD P can be paired with any other filter of Losma’s product range.
• Losma DMD and Losma DMD-P do not need any consumable filter.
• Also available in stainless steel

Unit tested

Every single unit is individually tested through strict control procedures. Each unit is issued a test certificate for quality and function.

Eco-friendly

Magnetic particles separation is done without using consumable filters.

Technical information

Losma DMD series is available in 7 standard models for flowrates ranging from 50 to 400 l/min of emulsion and from 25 to 200 l/min of neat oil.

Operation

• Contaminated coolant passes through the group of rotating magnetic discs (A), where magnetic particles are captured.
• A scraping blade (B) removes the metallic particles from the rotating group, conveying them to the sludge chute (C) which collects the waste into a tank.
• Clean oil is collected into a tank (D) and pumped back to the machine tool thanks to a dedicated pump, or is collected for a further process of fine filtration.

Download a Losma DMD Magnetic Separator brochure858.59 KB

Losma Extra coolant filter, neat oils filtration, emulsion filtration, industrial coolant filtration, machine tool coolant filtration.

Losma Extra and Losma Extra High are two new gravity bed filters for coolants.

• Losma Extra High has a double system of coolant discharge which grants more flowrates in a little space.
• Stainless steel version available
• Designed to flowrates up to 300l/min of neat oil and 600 l/min of emulsion

Unit tested

Losma guarantees that every single unit is individually tested through strict control procedures. Each unit is issued a test certificate for quality and function.

No waste of fabric

The inclined bed system reduces the filtration media consumption, while the proximity sensors allows a precise movement of fabric.

Fabric rewinding

Filtration systems of Extra series are supplied with a rewinding system to facilitate the changing operations.

Technical information

Losma Extra is available in two versions, normal and with augmented depth, with 11 models for throughput from 50 to 300 l/min for neat oils and from 100 to 600 l/min for emulsion. Filtration degree is set thanks to the tissue choice and varies from 10 to 50 microns.

Losma Extra High is also supplied with a hydraulic guard, a double system of spill doors on the sides, to avoid overflow phenomena caused by a wrong working of the dragging system.

Operation

• Contaminated coolant is piped into the trough (A) and distributed on the filtration fabric (B),retaining pollutant particles and allowing the cleaned to pass.
• The fabric collects pollutant particles until it is full and the coolant cannot cross it anymore. The coolant rises its level touching a float which actions the proximity sensor controlling the fabric movement and the replacing with the new one.
• Dirty fabric (C) is rewound with a dedicated system, while sludge are separated from a scraping blade.
• The clean liquid pass in the thank below (D) and is sent back to the machine tools thanks to the dedicated system, while sludge are separated from a scraping blade.

Optional

1. DMD

Pre-filtration system with rotating magnetic discs for the separation of magnetic polluting particles from coolant.

2. Electrical panel

For powering the system, control and command all signals.

3. Skim

Superficial oil skimmer, it allows to lengthen coolant quality and eliminate odors generated by anaerobic bacteria.

4. Collecting tank

For clean liquid to be sent back to machine tool.

5. Transfer tank

To collect dirty liquid for feeding the filter.

Download a Losma Extra Coolant Filter brochure1.07 MB

Losma Magneto magnetic separator, magnetic particles separator, industrial coolant filtration, machine tool coolant filtration.

Losma Magneto is a magnetic separation system, which can be adapted and personalized thanks to its flexibles design.

• Easy adaptable to customer requirements
• Coolant can be channeled for maximum flowrate or maximum performance
• Maximum efficiency due to Neodymium bars

Unit tested

Losma guarantees that every single unit is individually tested through strict control procedures. Each unit is issued a test certificate for quality and function.

Easy maintenance

Cleaning is very quick and easy, just remove from the liquid and slide the bars out of their position to discharge the waste.

Eco-friendly

Losma Magneto does not use electric power to operate or use consumable filters.

Technical information

Losma Magneto is made in stainless steel 304 and has permanent magnetic elements in Neodymium with a power of 5000 Gauss.

Operation

• Losma Magneto separator has to be inserted in the clean coolant tank, in an area near to the pump, so that the liquid can pass through its magnetic bars
• The maximum performance is obtained by channeling the coolant in a longitudinal way, with simple bulkheads.
• The cleaning for the Losma Magneto separator is very quick and easy: Losma Magneto is removed from the liquid, slipping the bars out of their position and discharging the waste into a container.

Download a Losma Magneto Magnetic Separator brochure821.37 KB

Losma Skim superficial oil eliminator, oil separator, industrial coolant filtration, machine tool coolant filtration.

Losma Skim is an eliminator of superficial oil, suitable to be used on every kind of basin or tank, thanks to its shape and building materials.

• Available in two version: disc (Losma Skim D) or belt (Losma Skim N)
• Can be used with any other filter of Losma’s product range.

Unit tested

Every single unit is individually tested through strict control procedures. Each unit is issued a test certificate for quality and function.

Long lasting coolant

Losma Skim removes from the coolant surface the veil of light products, which do not mix with water and create a barrier preventing air from entering in contact with emulsion allowing the formation of anaerobic flora bacteria.

Technical information

Losma Skim is available in two versions: disc (Losma Skim D) or belt (Losma Skim N). This last version is suitable for reduced space and when the tank is not at full capacity.

Operation

• The disc/belt (A) is immersed into the liquid. Thanks to rotation the polluting agents stick to its surface and are dragged out.
• During rotation the disc/belt meet two scrapers (B) fitted with a rubber rim which remove the film of polluting agents stuck to it and transport it outside by means of exit ducts (C).
• Skim can be equipped with an electrical control board with the possibility of setting up a temporized working cycle.

Download a Losma Skim Superficial Oil Eliminator brochure1.19 MB

Since 1974 Losma S.p.A. designs and engineers air and coolant filtration systems for machine tools. Thanks to a 40-years-know-how, and through an efficient technical assistance service, Losma is the only company to offer a truly comprehensive service to resolve all contamination problems in the industrial work place and it is the only one with consolidated know-how of both oil mist collection and liquid coolant filtration.

Losma S.p.A. is an International Leader on the market and is the sole company supplying complete solutions both for air and coolant filtration, able to cover over 95% of plant design requirements in the sector. Losma products are unique and innovative. The company distributes worldwide and is famous for efficiency, reliability and modularity.

Founded with the mission of making the workplace a healthier place, LOSMA S.p.A. is today a company with a strong eco-friendly identity and is committed in the research of new solutions to support companies in preserving the environment.

Losma S.p.A. is certified UNI EN ISO 9001:2008 and UNI EN ISO 14001:2004.

Losma group stands out for its vocation to export and internationalization. The headquarters is based in Italy, in Curno near Bergamo, and has a second office in Turin, but it controls directly the most important markets through four subsidiaries in Germany, India, UK and USA. Losma group exports to more than 60 countries thanks to its wide distributors’ network.

Mist and dust collectors

Centrifugal, static and electrostatic oil mist filtration systems, able to capture mists and smoke with an efficiency up to 99,97%.

Coolant filtration

Fabric, drum or gravity filtration systems able to remove metallic or not- metallic particles up to 1 micron. Capacity may vary from a few to thousands of liters per minute, depending on application: single machine use or larger centralized installations.

Engineering

Not only products but our historical know-how offered to customers for creating turn-key applications for every filtration requirement.

Improve the quality of the working environment

An increasing attention to environmental safety and protection in workplaces has been registered in the last decades from economical as well as political players: companies, users, control authorities and agencies who are strongly committed in respecting new regulations and operational guidelines.

All manufacturing companies are directly involved on these topics, especially those using machine tools, which employs coolants (neat oils or emulsions). Due to mechanical, thermic or pressure operations these liquids generate a mix of pollutants such as: mists, vapor, smoke and odors; with or without dusts and metallic swarf depending on worked material.

Air and coolant filtration systems are necessary to eliminate this pollutant mix from the workplace and can face different needs:

Health

If pollutants disperse in the air and are inhaled by people working on the machine tools, they could lead to serious health risks. Eliminating oil mists and metallic micro-particles from the workshop helps to prevent respiratory and dermatologic disease and allergies, dangerous for all employees.

Safety

Oil particles deposit onto surrounding surfaces (floor, walls, etc.) and on machine tools, threatening their good operation; thus, air filtration can prevent those accidents caused by slippery surfaces and diminish risks of fire and short circuit caused by the deposit of oil in electrical controls or electronic devices.

Cleaning

Oil mists and coolant filtration assists to secure a cleaner workplace and reduce maintenance costs. Avoiding oil particles deposit on surfaces, increases not only the safety of workplaces but also limits cleaning costs and reduce maintenance interventions and breakdown events.

Savings

Installing a filtration system for air or coolant allows to reduce both cleaning and maintenance costs for workplaces and those connected to special waste disposal. Once cleaned from pollutant particles coolants can be re-used in the machining process, thus securing savings derived from a longer life. Finally, all Losma systems are designed to grant the better performances with low energy consumption, contributing to the corporate’s energy saving program.

Caring for the environment

Supplying high quality and eco-friendly products represent the core of our company mission since the beginning, and the commitment is underlined by ISO 9001 and ISO 14001.

“Working clean, Breathing healthy” summarizes the company philosophy and becomes real in the continuous research for filtration solutions more efficient and eco-compatible. Every Losma system, both oil mist and dust collectors or coolant filters, is tested through strict control procedures, to obtain a certificate for quality and function.

R&D department constantly research new solutions to improve existing products and to offer cutting edge solutions for filtration and depuration to the market. All Losma systems are designed to satisfy three main characteristics:

Eco-friendly products

high efficiency motors, restorable filters, power regulation inverter are just some of the solutions adopted in the range of Losma’s mist collectors and coolant filters, to meet European regulations requirements for company plants for environmental management.

Environmental protection

installing a filtration system for neat oils or emulsion allows to clean the liquid from pollutant particles and re-use it into the machine tool. This system reduces the quantity of industrial environmental special waste, extending coolants life. Air filtration for oil mists and smoke allows cleaner air to release it back into the workshop, permitting cost-savings for heating in winter and air conditioning in summer.

Better productivity

re-using a clean coolant in the machine tool allows to reduce the number of flawed pieces during production; because the pollutant particles, which increases the margin of errors, have been removed. Moreover, an efficient depuration system allows to reduce machine stops for maintenance.