Entry model for multi-tasking machines:
Mazak Integrex j-200 NEO (High-performance)
- Exceptional milling versatility allows cutting from all directions with a single tool, reducing the number of tools required
- Wide range of machining options with B-axis indexed every 1 degree
- Main spindle utilizes high-power, high-torque built-in motor spindle
- Visualize energy consumption and regenerative power with the “Energy Saver” feature on the CNC system
- Easy automation
Make up for weak points of turret lathe
Weak points of turret lathe
Insufficient number of tools
Difficult to check interference with large workpieces
Mill tool holders are expensive
High-performance specifications for high productivity
Specifications | Milling spindle (40% ED) | Main spindle (40% ED) | ||
Standard | Single spindle turret | 1° index | 12000 min-1, 7.5 kW, 27.5 N・m |
5000 min-1, 15 kW, 167 N・m |
High-performance | Compact single spindle turret | 0.0001° index | 12000 min-1, 18.5 kW, 57.3 N・m |
5000 min-1, 18.5 kW, 326 N・m |
Exceptional milling versatility for multi-face machining
The milling spindle unit can be indexed in 1 degree increments, allowing outer diameter, end face, and diagonal machining with a single tool. Similarly, the second spindle performs various machining with a single tool, reducing cycle times. The high-performance specification with 0.0001° indexing offers enhanced versatility for a variety of workpieces.
1: 180° 2: 30°
Main spindle: designed for a wide range of workpieces
The high-power, high-torque built-in motor spindle provides excellent machining capabilities. The high-performance specification provides even higher power and torque at 18.5 kW (25 HP) and 326 N·m, enabling further improvements in productivity.

Second spindle performs continuous machining (Mazak Integrex j-200S NEO)
This is effective in reducing setup time for workpieces that require phase alignment. Continuous first and second machining to the finished workpiece contributes to machining accuracy.

Improved environmental performance with energy-saving equipment
Energy Saver
Energy consumption and the regenerative power produced through the energy saving equipment can be viewed visually on the CNC system to stimulate awareness of energy conservation. In addition, the system can control coolant and other equipment based on the cutting amount to reduce power consumption.
* An optional Smooth coolant system is required for the control of coolant and other equipment.

Environmentally friendly Smooth Coolant System (option)
Optimal control of coolant discharge amount
Energy saver automatically determines the optimal coolant discharge for energy-saving machining. Processing with reduced power consumption is possible at all times.

Energy-saving coolant system with sludge removal performance
No need to frequently clean the tank
The coolant tank has a coolant jet that makes a vortex in the center so that small machined chips will not settle in the tank. This feature makes it possible to keep the coolant tank clean and extend the service life of the coolant. Ease of maintenance is also ensured. The frequency of coolant changes is reduced as well as CO₂ emissions at coolant disposal.
Smooth Coolant installation results
Conventional coolant tank: Coolant degradation (spoilage)
Smooth Coolant System: Suppresses coolant spoilage and extends its life
Machine Specifications
Mazak-integrex-j-200 NEO (High-performance) | Bed length - 500U | Bed length - 1000U | |
Capacity | Max. machining diameter | Φ500 mm | Φ500 mm |
Max. machining length | 500 mm | 1016 mm | |
Main spindle | Max. spindle speed | 5000 min-1 | 5000 min-1 |
Spindle motor (40%ED) | 18.5 kW (25 HP) | 18.5 kW (25 HP) | |
Spindle motor (cont. rating) | 15 kW (20 HP) | 15 kW (20 HP) | |
Milling spindle | Max. spindle speed | 12000 min-1 | 12000 min-1 |
Max. torque (40%ED) | 57.3 N・m | 57.3 N・m | |
Max. torque (cont. rating) | 46.1 N・m | 46.1 N・m | |
Spindle motor (40%ED) | 18.5 kW (25 HP) | 18.5 kW (25 HP) | |
Spindle motor (cont. rating) | 15 kW (20 HP) | 15 kW (20 HP) | |
Automatic tool changer | Tool shank | HSK-A63 | HSK-A63 |
Tool storage capacity | 36 | 36 | |
Max. tool diameter | Φ125 mm | Φ125 mm | |
Max. tool length (from gauge line) | 250 mm | 250 mm | |
Max. tool weight | 5 kg | 5 kg | |
Travel | X-axis | 450 mm | 450 mm |
Y-axis | 200 mm | 200 mm | |
Z-axis | 550 mm | 1225 mm | |
B-axis | -30° 〜 +210° | -30° 〜 +210° | |
Rapid traverse rate | X-axis | 40000 mm/min | 40000 mm/min |
Y-axis | 40000 mm/min | 40000 mm/min | |
Z-axis | 40000 mm/min | 40000 mm/min | |
Machine size | Machine width × length | 2990 mm × 2420 mm | 3790 mm × 2420 mm |
Height | 2580 mm | 2580 mm | |
Machine weight | 8000 kg | 8900 kg |