6th Generation CNC System
THE MAZATROL MATRIX
- The heart of the Intelligent Machine

Intelligent Functions for Smarter Operation

The MAZATROL, the first conversationally programmed CNC system in the world, was introduced in 1981. In 1998, the MAZATROL was fused with a personal computer that incorporated our extensive expertise for unsurpassed operating efficiency. The newest model, the MAZATROL MATRIX has been designed to be the optimum system for machine tools.

Featured on complete INTEGREX IV and e-II series machnes and the VARIAXIS II series machines.

Featured on all QTN II, VCN II and HCN II series machines.

Video -MAZTROL MATRIX controler

MATRIX features include:

Large CNC Display

A 15” colour XGA LCD display is standard equipment for higher visibility of data, such as machine position, program, machine status and many other displays used by the operator for machine setup and operation.

"QWERTY" Keyboard

A QWERTY keyboard is standard equipment providing the same data input operation method as a personal computer. The previous CNC model did not have a full keyboard which required more time to enter data.

Pointing Device

The pointing device is used in the same manner as a personal computer mouse allowing teh operator to smoothly change the view of a 3D model and many other functions.

Rotary Dial Switches

Rotary dial switches allow an operator to detect override and axis selection by feel during machine setup and operation.

USB

Standard equipment - Programs can be easily downloaded to teh machine CNC.

Advanced features of the 6th generation CNC system

Manufacturing solutions always include four factors: High Quality, High Productivity, Ease of Operation and Safety.

Development of the new CNC focussed on three elements: Shop-Floor Programming, Programming in Office and Hardware

The interrelationship of these factors and elements by the Mazatrol Matrix will provide you unsurpassed advantage.

Shop-Floor Programming & Programming in Office

High accuracy is ensured by the sub-micron[0.0001 mm/0.0001°] minimum program increment for both MAZATROL and EIA/SO programs. The system's high speed calculation capability delivers high accuracy, high speed amchining even with sub-micron program commands.

Programming in Office

Machine programs can be made and then checked for machine interference in the office using the MATRIX CAM system.
Programs can be easily downloaded to the machine CNC overa network for convenient program management and high efficiency operation.

*Optional equipment

Programming in Office

High speed, high accuracy machining demands smooth machine control- when combined with sub-micron program data increments and 5-axis simultaneous commands, huge amounts of data are required to be calculated. The maximum vectorial federate used for machining complex surfaces is 4 times faster than the standard specification of the previous CNC system. This is made possible by the increased computing power of the new RISC-CPU.

*64-bit single engine for the MAZATROL MATRIX NEXUS

Hardware

More data can be utilised thanks to increased capacity

•Maximum program size: 2MB (2 times more than previous model), 8MB [Option]

•MAZATROL tool data registration: 4000 tools maximum (4 times more than previous model)

•Tool offsets: 4000 sets (8 times more than previous model)

Shop-Floor Programming & Programming in Office

Machine Programs can be made with minimum errors and time required for test cuts thanks to realistic machine 3D simulation displays that can be used for convenient program confirmation and checking for any machine interference. Additionally, this unique MAZATROL function makes it possible to simulate the machining of a new program during the machining of the current workpiece.