Head Office
11 Winterton Road
Clayton, Victoria
Australia 3168
(03) 9542 6262

A series

Cincom L series

L16/20 series

L20 VIII L20 VIII

L20 toolsL20 tool configuration

When cross machining is required, three cross spindles (standard on type VIII model) can be mounted, totaling eighteen tools: five turning, seven rotary, and six drilling tools.

The three cross spindles can also be used as end-face drilling spindles by rotating the holder 90 degrees.

When end-face machining is required on the front and back, an optional six live tool holder is available. With this tool holder option the L20 now totals 21 tools: five turning, ten rotary, and six drilling tools.

The L20 type VII offers five turning and five live rotary tools (cross milling/drilling) on the gang plate.

When only turning is required, the L20 type V offers five turning tools on the gang plate with no live tools. As future live tool needs may be required, the type V model can be upgraded to a type VII or VIII by purchasing additional live tool holders that easily fit into the existing L20 gang tool plate. This modular concept can support a wide variety of machining processes depending on your current or future parts machining requirements.

 

L16/20 I

L16/20 VII

L16/20 VIII

Control axis / Line control group 3-axes, 1-lines control groups 5-axes, 2-lines control groups 5-axes, 2-lines control groups
Max. machining diameter mm L16 : Ø 16
L20 : Ø 20		 L16 : Ø 16
L20 : Ø 20		 L16 : Ø 16
L20 : Ø 20
One chuck machining length mm 200 200 200
Max. spindle speed min-1 10,000 10,000 10,000
No. mountable tools tools 11 16 MAX 21
Spindle motor kW 2.2/3.7 2.2/3.7 2.2/3.7
 

Cincom L series

L32 series

L32 VIII L32 VIII

L32 toolsL32 tool configuration

The L32 utilizes a “Full servo system”. Even the chuck clamping or workpiece collecting movements are executed by servo motors. This reduces idle time which is common in hydraulic and other electromechanical devices. This not only results in less idle time but also less power consumption, less maintenance and less operating costs of the machine.

  • Main Spindle (Built-In Spindle Motor): 1 degree indexing/C-Axis Control (Standard)
  • Back Spindle (Built-In Spindle Motor): 1 degree indexing/C-Axis Control (Optional)
  • Main Spindle through hole ID: 36mm [1.41”] (Previous L32: 33mm [1.29”])
  • High Power Live Tool Motor: 1.0KW [1.33HP] (Previous L32: 0.75KW [1HP])
  • Maximum number of Mountable Tools: 20 as standard (22 is available by mounting the optional 4-ID Sleeve Holder)
  • Turning Tools: 5 Live Tool Spindles: 4 ID Tools: 6 (3-Front/3-Back) Back ID Tool: 5
  • Windows-based NC Unit

The machine is equipped with a higher performance CPU than previous Windows based machines. Shorter computing time and higher speed macros achieve less cycle time.

 

 

L32 VII

Control axis / Line control group 8-axes, 8-lines control groups
Max. Machining diameter mm Ø 32
One chuck maching length mm 320
Max. spindle speed min-1 8,000 (Main) | 4500 (Back)
No. mountable tools tools 20 (22 Option)
Spindle motor kW 3.7/5.5 (Main) | 1.5/2.2